Analysis of Metal Frame Wire Mesh Washable Pre Air Filter for Industrial Dust
I. Core Structure and Material Characteristics
Frame Materials
Aluminum frame: Lightweight and corrosion-resistant, suitable for conventional industrial environments.
Stainless steel frame: High-strength and high-temperature resistant (up to 400°C), suitable for acid-alkali corrosion or extreme temperature scenarios (e.g., metallurgy, cement industry).
Galvanized frame: Cost-effective, suitable for ventilation systems with moderate humidity and no strong corrosion.
Filter Media Design
Multi-layer corrugated aluminum/stainless steel mesh: Forms a gradient pore structure through cross-layered arrangement, enabling multiple directional changes in airflow to enhance dust capture efficiency.
Washability: Smooth filter surface allows easy dust removal, supporting water or air gun cleaning for cost-effective reuse.
Temperature resistance: Aluminum mesh withstands 250°C; stainless steel mesh withstands 400°C, meeting high-temperature operational requirements.
II. Performance Parameters and Standards
Filtration Efficiency
EN779 standard: G3 (average gravimetric efficiency 65%-80%), G4 (MERV6-7, ≥90% efficiency for particles ≥5μm).
Application: Acts as primary filtration to protect downstream high-efficiency filters (e.g., HEPA) and extend their lifespan.
Resistance and Airflow
Initial pressure drop: ≤20Pa (G3 grade), low-resistance design reduces system energy consumption.
Rated airflow: Single filter handles 1,600-3,200m³/h depending on size, compatible with large air compressors and ventilation systems.
Lifespan and Maintenance
Service life: 2-4 years under dust concentration ≤50mg/m³ and temperature ≤80°C (1.5-2x longer than traditional media).
Maintenance cost: Washable design reduces replacement frequency, cutting costs by 30%-50%.
III. Application Scenarios and Industry Compatibility
Industrial Ventilation and HVAC Systems
Primary filtration: Used in HVAC systems for buildings and industrial plants to intercept coarse dust (e.g., PM10) and prevent downstream equipment blockage.
High-temperature resistance: Suitable for filtering exhaust gases at 220-280°C from cement kilns and metallurgical smelters.
Specialized Environmental Filtration
Corrosive gases: Stainless steel frame + PTFE-coated filter media resist acidic gas corrosion in chemical and electroplating industries.
Flammable/explosive dust: Flame-retardant media (e.g., Nomex) meet safety requirements for dust explosion-prone environments.
Typical Use Cases
Automotive wax spray booths: Filters wax mist particles to prevent pipeline blockage and extend equipment lifespan.
Paint spray booths: Intercept paint droplets to improve workshop air quality and reduce employee health risks.
IV. Key Selection Parameters
Flow Matching
Select filter size (e.g., 592×592×46mm) based on air compressor displacement to ensure inlet airflow matches host requirements.
Pressure Drop Control
Initial pressure drop should be ≤500Pa; replace filter if pressure exceeds 1,000Pa to avoid 5%-15% energy consumption increase.
Material Adaptation
Humid environments: Choose corrosion-resistant coated media (e.g., galvanized frame + aluminum mesh).
High-temperature environments: Opt for stainless steel frame + fiberglass media (temperature resistance up to 400°C).
High-precision requirements: Supports customization for 1-10μm accuracy to meet cleanliness standards in electronics and pharmaceuticals.
Hot Tags: metal frame wire mesh washable pre air filter for industrial dust, China metal frame wire mesh washable pre air filter for industrial dust manufacturers, suppliers, factory, air filter for laboratories, air purifier filter, automotive air filter, hepa air filter, high efficiency air filter, High Temperature Resistant High Efficiency Air Filter