When using an RO reverse osmosis water purifier, attention should be paid to the following matters to ensure its normal operation and extend its service life:
Installation Precautions
Choosing the Right Installation Location:
It should be installed in a stable, well-ventilated place with a suitable temperature (5~45℃), away from factors that may damage the equipment, such as high temperature, direct sunlight, and chemicals.
It cannot filter hot water or be installed behind a water heater.
If the water pressure is higher than 0.4Mpa, a pressure reducing valve needs to be installed.
Ensuring Water Source Quality:
Before installing the water purifier, a water quality test should be conducted on the water source to ensure that it meets the requirements of the RO reverse osmosis water purifier.
If the water quality does not meet the standards, corresponding pretreatment measures should be taken, such as adding activated carbon filters or granular carbon filters.
Connecting Pipelines Correctly:
When connecting pipelines, ensure that they are securely connected and there are no leaks, and avoid bending or making them too long, as this may affect the normal operation of the water purifier.
When inserting the pipes, make sure they are fully inserted to avoid the risk of leakage.
The pure water and wastewater outlets must not be installed in reverse.
Power Grounding:
Ensure that the power cord of the water purifier is connected to a grounded outlet to prevent electrical failures or leakage.
Do not use an incompatible power supply.
Post-installation Inspection:
After installation, turn on the water source and outlet valve to check for any leakage from the water purifier.
Check if the filters are installed correctly and ensure all filters are in place.
Usage Precautions
Regularly Replacing Filters:
Filters are crucial for ensuring water quality and should be replaced regularly. Depending on water quality and usage, it is generally recommended to replace them every 3 to 6 months.
Choose filters from reputable manufacturers to ensure their quality and effectiveness.
Cleaning and Disinfection:
Regularly clean and disinfect the water purifier to prevent bacteria growth.
When cleaning, follow the cleaning methods provided by the manufacturer and avoid using strongly acidic or alkaline cleaners, as they may damage the equipment.
Keeping the Equipment Dry:
During use, keep the equipment dry and avoid water droplets staying inside to prevent bacteria growth and equipment damage.
Regular Equipment Inspection:
Regularly check the operating status of the water purifier, such as whether the pressure gauge and flowmeter are working properly.
If any abnormalities are found, handle them promptly. At the same time, observe whether the water quality is normal. If there are odors or the water becomes turbid, check and address the issue promptly.
Safe Operation:
When performing maintenance, always turn off the water inlet valve and power supply to ensure the equipment is in a safe state.
Record Keeping and Monitoring:
Establishing comprehensive equipment operation records and maintenance archives helps identify problems and take measures in a timely manner.
In summary, when using an RO reverse osmosis water purifier, attention needs to be paid to installation, usage, maintenance, and other aspects. Only by installing it correctly, using it reasonably, and maintaining it regularly can the normal operation and extended service life of the water purifier be ensured, thereby providing safe and healthy drinking water.