Introduction
This filter is installed at the oil suction port of the oil pump to protect the oil pump and other hydraulic components, to avoid inhalation of contaminated impurities, effectively control hydraulic system pollution, and improve the cleanliness of the hydraulic system.
This filter can be directly installed on the side, upper or bottom of the oil tank. The oil suction cylinder is immersed below the oil tank, and the filter head is exposed outside the oil tank, so that the oil in the oil tank will not flow out when replacing and cleaning the filter element.
This product has the advantages of novel design, convenient installation, large oil passing capacity, small resistance, and convenient cleaning or replacing the filter element.
Model and Technical Parameter
|
Filter model |
Flow rate |
Filtr |
|
Original pressure loss (MPa |
Communication devce |
Connection method |
Weight |
Filter cartridge |
|
|
V |
A |
||||||||
|
TF-25X*L-C/Y |
25 |
80 |
15 |
<0.01 |
12 |
2.5 |
Tubular type |
0.4 |
TFX-25X* |
|
TF-40X*L-C/Y |
40 |
20 |
0.45 |
TFX-40X+ |
|||||
|
TF-63X*L-C/Y |
63 |
25 |
0.82 |
TFX-63X* |
|||||
|
TF-100X*L-C/Y |
100 |
32 |
0.87 |
TFX-100X* |
|||||
|
TF-160X*L-C/Y |
160 |
40 |
1.75 |
TFX-160X* |
|||||
|
TF-250X*F-C/Y |
250 |
50 |
Flange |
2.60 |
TFX-250X* |
||||
|
TF-400X*F-C/Y |
400 |
65 |
4.3 |
TFX-400X* |
|||||
|
TF-630X*F-C/Y |
630 |
90 |
6.2 |
TFX-630X* |
|||||
|
TF-800X*F-C/Y |
800 |
90 |
6.9 |
TFX-800X* |
|||||
Note: According to user requirements, different specifications and models of filters can be customized.
Model Description
Main Feature
Convenient installation and connection, simplifying system pipelines:
This filter can be directly installed on the side, bottom, or upper part of the oil tank. The filter head is exposed outside the oil tank, and the oil suction cylinder is immersed below the liquid level in the oil tank. The oil outlet is equipped with tubular or flange connections. The filter is equipped with self sealing valves and other devices, which eliminates the need for installing other pipe fittings such as stop valves in the pipeline, thereby simplifying the pipeline and facilitating installation.
A self sealing valve is provided to facilitate replacement, cleaning of filter elements, or maintenance of the system:
When replacing or cleaning the filter element or maintaining the system, it is only necessary to unscrew the filter end cap and cleaning cap. At this time, the self sealing valve will automatically close, isolating the oil path in the tank, so that the oil in the tank will not flow out, making it very convenient to clean, replace the filter element or maintain the system. If the self sealing valve is opened, it can also be used to drain oil out of the tank.
Equipped with filter element pollution detector and oil bypass valve to improve the reliability of the hydraulic system:
When the filter element is blocked by pollutants until the straightness of the oil outlet is 0.0 7 8MPa, the transmitter sends a signal and the filter element should be replaced or cleaned in a timely manner.
If the machine cannot be stopped immediately or no one comes to replace the filter element at this time, the oil bypass valve located on the upper part of the filter element will automatically open, with an opening value of0.02MPa vacuum to avoid oil pump suction failure.
But at this point, the machine should be shut down for replacement or cleaning of the filter element to maintain the cleanliness of the hydraulic system and improve its reliability.
Hot Tags: tf series self sealing oil suction filter, China tf series self sealing oil suction filter manufacturers, suppliers, factory, Microporous PP Folded Filter Element, HYPALL Water Filter Element, Air Filter Cartridge Series, HL500 II Dust Removal Polyester Filter Material, Dust Removal Filters, High Efficency Air Supply Outlet