When using a hygienic single-core liquid filter, in order to ensure its normal operation, extend its service life, and guarantee operational safety, the following precautions need to be taken:
I. Pre-operation Inspection
Check Equipment Integrity: Before use, inspect whether the filter and its accessories are complete and intact, especially the sealing rings, to prevent liquid leakage.
Clean Inner Walls: Ensure that the inner walls of the filter are clean and free of dust, oil, and other impurities, as these may affect the filtering effect.
Check Power Supply: For liquid filters that require power, check for any leakage to ensure safe use.
II. Installation and Connection
Installation Direction: Install the filter correctly according to the instructions, paying attention to not reversing the inlet and outlet directions. Generally, the port on the edge of the filter base plate is the raw water inlet, while the pipe connected to the filter cartridge socket is the clean water outlet.
Secure Connections: The connections between the filter and the surrounding frame or pipes must be secure and reliable to avoid glue leakage or deformation due to pressure.
III. Operation and Maintenance
Add Liquid According to Capacity: When in use, add liquid according to the specified capacity in the instructions to avoid damaging the equipment or reducing the filtering effect due to overfilling.
Regular Cleaning and Filter Cartridge Replacement: Regularly clean the filter and replace the filter cartridge to ensure filtering effectiveness. When cleaning, be sure to disconnect the power supply and avoid immersing the filter in water to prevent electrical leakage. The replacement interval for the filter cartridge should be based on usage and the manufacturer's recommendations.
Control Operating Pressure: During the filtering process, control the operating pressure within a reasonable range. Typically, the pressure used is around 0.1MPa. As time and flow increase, the micro-pores of the filter cartridge may become clogged, causing the pressure to rise. Generally, it should not exceed 0.4MPa, and the maximum should not exceed 0.6MPa.
Keep Hands Dry: When operating the liquid filter, keep your hands dry to prevent slips that may lead to improper operation or safety accidents.
Prevent Liquid Spillage: During use, avoid spilling liquid into your eyes or on your skin to prevent injury.
IV. Storage and Preservation
Dry and Ventilated: When not in use, store the filter in a well-ventilated, dry, and moisture-proof area, avoiding direct sunlight and humid environments.
Proper Preservation: Filters that are not used for a long time should be properly stored to avoid moisture or dust accumulation.
V. Summary of Precautions
Strictly adhere to operating procedures to ensure operational safety.
Regularly inspect and maintain the filter to ensure its normal operation.
Pay attention to the operating environment and conditions to avoid adverse effects on the filter.
If any issues or malfunctions occur, immediately stop the machine and contact professionals for repairs.
In summary, when using a hygienic single-core liquid filter, attention needs to be paid to various aspects such as pre-operation inspection, installation and connection, operation and maintenance, storage and preservation, etc., to ensure the normal operation and safe use of the filter.