Our Products
Why choose us
Advanced equipment
We adopt advanced equipment and instruments to implement standardized management
7*24-hour after-sales service
We offer 7*24-hour after-sales service to ensure customer satisfaction with our products.
Customized as needed
We can customize filters of different specifications and models according to user requirements.
Our factory & quipment
The installation process for self-sealing oil suction filters outside the tank (such as the TF series) is generally straightforward. Below are the installation steps and precautions compiled from high-authority sources:
Installation Steps
Determine the Installation Location:
Based on the structure and layout of the oil tank, determine the installation location for the filter. The filter can be installed on the side, bottom, or top of the tank, ensuring that the suction cylinder can be submerged in the oil within the tank.
Prepare the Connections:
Depending on the connection method of the outlet (threaded or flanged), prepare the corresponding connection components, such as pipe fittings, flange plates, etc.
Install the Filter:
Fix the filter in the selected position, ensuring that the filter head is exposed outside the tank and the suction cylinder is submerged below the oil level inside the tank.
Use the connection components to connect the outlet of the filter to the suction inlet of the oil pump, ensuring a tight connection without leakage.
Check Sealing:
After installation, check that the connections between the filter, the tank, and the oil pump are properly sealed to prevent oil leakage.
Start the System:
After confirming that the installation is correct, start the hydraulic system and check if the filter is operating normally, without abnormal sounds or leakage.
Precautions
Pre-installation Check:
Before installation, check that the filter is intact and the filter element is clean and not clogged.
Follow Installation Specifications:
During installation, follow the manufacturer's installation specifications and requirements to ensure the correct installation and use of the filter.
Regular Maintenance:
During use, regularly clean or replace the filter element to maintain the filtering effect of the filter and the cleanliness of the hydraulic system.
Observe the Indicator:
The filter is equipped with a filter element clogging indicator. When the filter element is clogged, the indicator will send a signal. Promptly shut down the system to clean or replace the filter element to avoid damage to the hydraulic system.
Safe Operation:
During installation and maintenance, adhere to safe operating procedures to avoid accidents.
In summary, the installation process for self-sealing oil suction filters outside the tank is relatively simple but requires attention to detail and adherence to the manufacturer's specifications. Through correct installation and maintenance, the normal operation of the filter can be ensured, improving the cleanliness and reliability of the hydraulic system.
We can customize filters of different specifications and models according to user requirements.
Hot Tags: factory direct sales tf series external self-sealing oil suction filter tank filter and filter element, China factory direct sales tf series external self-sealing oil suction filter tank filter and filter element manufacturers, suppliers, factory, High Temperature Resistant High Efficiency Air Filter, HL500 I Polyester Needle Punched Filter Material, HBL Series Plate Air Filter, Combine High Efficiency Air Filter, HFU Series Fan Filter Unit, TF Series Self Sealing Oil Suction Filter